Specification:
Brand Name: Happymodel
Model: Mobula7
Item Name: 75mm Wheelbase 2S Brushless Whoop FPV Racing Drone
Wheelbase: 75mm
Version: Basic Version / Standard Version ( Optional )
– The difference of them is the packaged charger.
Basic Version: USB Charger
Standard Version: 6 – way Charger
Weight: 25.9g (without battery)
Crazybee F3 Pro Flight Controller:
Item Name: Crazybee F3 Pro FC
MCU: STM32F303CCT6 ( 72MHZ, 256K FLASH )
Sensor: MPU – 6000 ( SPI connection )
Board size: 28.5 x 28.5MM
Power supply: 1 – 2S battery input ( DC 3.5 – 8.7V )
Built-in 5A ( each ) Blheli_S 4in1 ESC Dshot600 ready
Built-in Receiver ( Different version having a different receiver )
Built-in Betaflight OSD ( SPI Control )
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready
Firmware
( Frsky version ) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR
( Flysky version ) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
( DSM2 / DSMX version ) CRAZYBEEF3 PRO Firmware target: CrazybeeF3DX
( Frsky EU – LBT version ) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
Onboard 5A 4 In 1 ESC:
Power supply: 1 – 2S LiPo / LiPo HV ( 3.5v / 8.7v )
MCU upgraded to EFM8BB21
Current: 5A continuous peak 6A ( 3 seconds )
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7
Default protocol: DSHOT600
Onboard Frsky NON-EU receiver Version:
SPI BUS receiver
Frsky D8 / D16 switchable
Compatible Non-EU transmitter both D8 and D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground ): 300m
Onboard Frsky EU – LBT Version
( External XM + receiver ):
Operating Voltage Range: 3.7 – 10V
Operating Current: 30mA 5V
Operating Range: Full range
With RSSI output on board: Analog 0 – 3.3V
Firmware Upgradeable, Default firmware EU-LBT with RSSI
SE0802 16000KV Motor:
Model: SE0802
KV: 16000KV
Configuration: 9N12P
Stator Diameter: 8mm
Stator Length: 2mm
Shaft Diameter: 1.0
Weight: 1.8g
Support 1 – 2S Lipo
No.of Cells: 1S Lipo
Propeller:
40mm 3 – blade Propeller ( 4 CW + 4 CCW )
5.8G VTX AIO Camera:
5.8G 40CH 25mW VTX
Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA ( type )
700TVL FOV120 Camera
Camera resolution: 700TVL
Field of view: 120°
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceland
Smart audio ready ( Frsky EU – LBT and DSMX version not compatible )
Lipo Battery:
Capacity: 250mAh
Voltage: 3.8v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 55mm x 12mm x 7mm
Weight: 6.5g
Connector: PH2.0
Notes: Need 2pcs batteries for Series circuit
Features:
– New Crazybee F3 PRO Flight controller 1-2s Lipo compatible
– 2S whoop more powerful and more flight time
– Betaflight support , multi flight mode: ACRO / AIR / ANGLE
– New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
– Smartaudio ready , change VTX bands, channels via OSD
DSM2 / DSMX and Frsky EU – LBT version are Serial – based receiver, so Smartaudio is not compatible.
– Adjust the settings and the PID of the flight controller via OSD
– Frsky Non – EU version support NON – EU Frsky transmitter D8 / D16 compatible
– Flysky version support both AFHDS and AFHDS – 2A protocol transmitter
– DSM2 / DSMX version support DSM2 and DSMX compatible spectrum transmitter
– Frsky EU – LBT version support Frsky EU – LBT firmware transmitter
– Full telemetry function ready
– Head lights ready
– Camera angle adjustable
– Real Bind and Fly version
– Buzzer Ready